HVAC Systems and Applications! - Resources, Tools and Basic Information for Engineering and Design.
Air condition load and evaporator and condenser water flow rate
Sponsored Links
The total heat can be expressed as:
H = 500 q dt (1)
where
H = total heat (Btu./hr.)
q = water flow rate (gallons per minute - gpm)
dt = temperature difference (oF)
Evaporator water flow rate can be expressed as
qevap = 24 hevap / dt (2)
where
qevap = evaporator water flow rate (gallons per minute - gpm)
hevap = air condition load (tons = 15,000 Btu/h = 3,782 k Calories/h)
Condenser water flow rate can be expressed as
qcond = 30 hcond / dt (2)
where
qcond = condenser water flow rate (gallons per minute - gpm)
hcond = air condition load (tons = 15,000 Btu/h = 3,782 k Calories/h)
Sponsored Links
Difficult to find your favorite ToolBox page? Add a link to the page in your own personal Shortlist!
Translate this page to
Spanish
French
German
Italian
Dutch
Norwegian
© The HVAC ToolBox
The content in The HVAC ToolBox is copyrighted but can be used with NO WARRANTY or LIABILITY. Important information should always be double checked with alternative sources. All applicable national and local regulations and practices concerning this aspects must be strictly followed and adhered to.
We appreciate any comments and tips on how to make The HVAC ToolBox a better information source. Please contact us by email if You find any faults, inaccurate, or otherwise unacceptable information.
5 12 1
View Engineering, Design and Construction news in the absolute FREE Automatic WebSite Viewer. Engineering Breaking News!
