Sound Absorption Coefficients for some common Materials

Sound absorption coefficients for some common materials as plaster walls, brickwork, plywood panels etc.

Sponsored Links

The sound absorption coefficient indicates how much of the sound is absorbed in the actual material. The absorption coefficient can be expressed as:

α = I_a / I_i (1)

where

I_a = sound intensity absorbed (W/m²)

I_i = incident sound intensity (W/m²)

Absorption coefficient - α - for some common materials can be found in the table below:

Material	Sound Absorption Coefficient - α
Plaster walls	0.01 - 0.03
Unpainted brickwork	0.02 - 0.05
Painted brickwork	0.01 - 0.02
3 mm plywood panel	0.01 - 0.02
6 mm cork sheet	0.1 - 0.2
6 mm porous rubber sheet	0.1 - 0.2
12 mm fiberboard on battens	0.3 - 0.4
25 mm wood wool cement on battens	0.6 - 0.07
50 mm slag wool or glass silk	0.8 - 0.9
12 mm acoustic belt	0.5 - 0.5
Hardwood	0.3
25 mm sprayed asbestos	0.6 - 0.7
Persons, each	2.0 - 5.0
Acoustic tiles	0.4 - 0.8

Note! The absorption coefficient varies with the frequency of sound.

Total Room Sound Absorption

The total sound absorption in a room can be expressed as:

A = S₁ α₁ + S₂ α₂ + .. + S_n α_n = ∑ S_i α_i (2)

where

A = the absorption of the room (m² sabine)

S_n = area of the actual surface (m²)

α_n = absorption coefficient of the actual surface

Mean Absorption Coefficient

The mean absorption coefficient for the room can be expressed as:

a_m = A / S (3)

where

a_m = mean absorption coefficient

A = the absorption of the room (m² sabine)

S = total surface in the room (m²)

A rooms acoustic characteristics can be calculated with the formulas above, or estimated for typical rooms.

ToolBox ShortList

Difficult to find your favorite ToolBox page? Add a link to the page in your own personal Shortlist!

• Add this Page! • Delete the ShortList!

Translate this page to Spanish French German Italian Dutch Norwegian

The content in The HVAC ToolBox is copyrighted but can be used with NO WARRANTY or LIABILITY. Important information should always be double checked with alternative sources. All applicable national and local regulations and practices concerning this aspects must be strictly followed and adhered to.

We appreciate any comments and tips on how to make The HVAC ToolBox a better information source. Please contact us by email if You find any faults, inaccurate, or otherwise unacceptable information.

5 12 1